12w Dotless, COB IP67 Waterproof LED Strip - Colour Adjustable / Tunable
Key Features:
- Dotless design - gone are the days of seeing the LED dots.
- Colour tunable using either our remote control or wall controller solution, you can tune the LED colour from warm to natural to cool white and everything inbetween.
- Cut to your dimensions - add to basket in metres only what you need and we will cut it and solder the strip attaching a 1m long wire, ready to use with your controller.
- 5 Year Warranty.
- Super bright - 1440 lumens per metre.
- Control via your smart speaker and app by using our unique smart controller.
- IP67 Rated - suitable for outdoor and indoor use.
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Our COB (dotless) LED Strip is suitable for any room in your space. It is IP67, which means that you can use it everywhere including the kitchen, bathroom and even outdoors.
This LED Strip is also colour tunable, this means that you can adjust the LED colour from warm white all the way upto cool white, by using a simple to use LED controller, you can also smoothly dim the brightness of the light (the LED controller is sold seperately)
We offer a fully bespoke solution and we cut all of our LED tape to measure, so you can buy the individual lengths of light which you need and we will cut them and solder a 1m long wire onto the end of every strip.
Accessories:
LED Drivers - this LED strip is 24v DC which means that you need a LED Driver to use this product.
Please see our full selection below:
https://www.simplelighting.co.uk/led-strip-lights/led-drivers/
The LED strip is 12w per metre, the driver must be above the wattage which you are using. So as an example: if you are buying 6m of LED Strip 6m * 12w = 72w in power - therefore you would need a LED Driver rated 72w or higher, such as our 100w one, seen here: https://www.simplelighting.co.uk/100-watt-led-driver-3-year-warranty-in-12v-or-24v-dc/
LED Controllers - because this LED tape light is colour tunable / adjustable, you need a way to control the LED colour and the brightness, please choose either of these below:
Remote control:
https://www.simplelighting.co.uk/colour-adjustable-remote-control-receiver-4-channel/
Wall controller:
Technical Information:
- Dimensions: 14mm wide * 3mm deep
- SMD2835
- 12w per metre
- CRI >90
- 5 Year Warranty
- Lumens: 1440 per metre
- IP67 Rated
- 24v DC
| Average Life (Hours) | 30,000 |
|---|---|
| LED Strip Type | Dual Colour |
| IP Rating | IP67 |
| Choose LED Colour | Tunable |
| Beam Angle | 160° |
| Lumens | 1440 |
| Dimmable | Dimmable |
| Input Voltage | 24v DC |
| Power | 12w |
| Cable Length | 1000mm |
| Warranty | 5 Years |
For delivery or returns information, please refer to the page below.
-
-
-
100 Watt LED Driver - 3 Year Warranty In 12v or 24v DC£26.66 £31.99 Was £59.99 Save £28.00
-
-
Wall Mounted Controller, For Dual White CCT LED Products, Mains Powered£24.16 £28.99 Was £39.99 Save £11.00