30w LED Driver - 12v or 24v - Dali 2 Compatible
- DALI dimming function (0-100%)
- Compatible with smart LED fittings (DALI 1 or DALI 2 controller needed)
- 30w maximum load
- Safety features: short circuit, overload and over voltage protection
- Built-in PFC function
- Choose between 12v DC or 24v DC LED driver
- Ideal to use with low-voltage strip lights and under cabinet lights
- Warranty: no hassle 3 Years
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
DALI dimming function (0-100%)
This LED driver is powered by DALI, a 2-way communication protocol used to control and communicate with the components in a lighting system. It is compatible with DALI and DALI 2 dimming systems and provides dimming functions from 0% to 100%!
Please note that this LED driver requires other DALI-powered devices. Its dimming feature is only available with other DALI devices. If you have a DALI system or plan to upgrade to one, this LED driver will significantly help your setup! With it, you can dim/brighten, switch between colours, complex scene-setting, and other fixture-specific functions. This driver is compatible with the original DALI and the upgraded DALI 2 technology, giving you a broader range of connectivity.
Compatible with Smart LED Fittings (DALI controller needed)
You can integrate this LED driver with your smart system if you have a DALI controller. Why do you want smart lights in your home? Integrating your lighting system with your smart home automation will make it more efficient and cost-effective!
Say you went on vacation and suddenly remembered forgetting to switch off the lights in your bedroom. With a smart lighting system, you can access your fittings using your mobile phone! Instead of waiting until you return, you can remotely switch them off. A smart lighting system can also enhance your property's security. You can automate wake-up and sleep hours so your lights will activate at specific periods, creating the illusion that someone is home!
30w 12v DC or 24v DC LED Driver
While many LED fixtures are mains-powered, there are low-voltage fittings that require an LED driver to regulate the power supply. This LED driver is available in 12v DC or 24v DC. When purchasing, ensure that the input voltage of the fitting is the same as the output voltage of the driver. So, if your LED under cabinet light is 12v DC, buy a 12v DC LED driver. Alternatively, if it's 24v DC, then pick a 24v DC driver.
Additionally, this LED driver has a maximum capacity of 30w. If you're going to connect multiple fixtures, ensure that their total wattage does not exceed 30w. Otherwise, both the lights and the driver may get damaged!
Ideal to use with Low-Voltage Strip Lights and Under Cabinet Lights
This LED driver is suitable to use with our extensive collection of low-voltage LED strip lights and LED under cabient lights. If you are unsure if the fixture you are eyeing is compatible with this LED driver, you may call or email us, so we can assist you!
Aside from that, this LED driver is equipped with several safety features, such as short circuit, overload and over voltage protection. It also has a built-in active PFC function. With these qualities, you are assured that your lighting system is capable and safe to use! It will function how you want it to, without compromising the overall safety of your entire home.
IP20 Rated - Suitable for Indoor Applications
Since this LED driver has an IP20 rating, it is only suitable for indoor applications, except the bathroom. It does not have enough protection against liquids, so we strongly advise keeping it away from rooms where water is frequently present. Nevertheless, you have nothing to worry about because it will not limit the areas where you can install. You can still pair this LED driver with the low-voltage cabinet lights or strip lights in your dining room, kitchen (far from splash zones), bedroom, living room, hallway, storage room, pantry, home office, game room, wardrobe, etc.
For bathrooms and outdoor areas, you need an LED driver with a higher IP rating.
Mains Wirable - Connect Straight to the Mains Circuit
Because this LED driver is mains wirable, you can link it straight to the mains circuit. You can hardwire it to the primary power supply to control your lights with a regular light switch or dimmer on the wall, or if you choose another method, you can add a plug at the end of the driver so that you can plug your fixtures into an empty socket to turn them on/off. While the first option will give you a built-in setup, it demands more skills. On the flip side, the second option is more DIY-friendly, but wires may be visible, and you need to have a socket nearby.
If you’re not sure about doing any of the wiring, it’s best to contact an electrician to ensure your home’s security and your own!
Switch Type | Rocker Switch |
---|---|
Length | 170mm |
Width | 53.4mm |
Height | 28mm |
IP Rating | IP20 |
Dimmable | Dimmable |
Input Voltage | 220-240v |
Power | 30w |
Warranty | 3 Years |
For delivery or returns information, please refer to the page below.