COB Dotless LED Strip Lighting, IP67, RGB+CCT (All Colours & Whites)
- RGB colour-changing + CCT Changeable. (EG: You can use most LED colours plus warm, natural and cool white LED)
- Suitable to use with our RGB+ CCT LED Remote Control and Receiver Kit or Smart Home controller
- All lengths include a one-metre-long cable
- CRI >90
- 24v DC - an LED Driver is required
- Dotless COB LED Tape.
- Cut to measure—you don't have to pay more than you need. Order online or contact us on 0333 443 2465 to order your required lengths, and we will do the soldering for free!
- 5-year warranty
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Dotless LED Strip
Regular LED strip lights have individual LED chips sitting next to each other. Some don't mind this, especially those that enclose the strips in an LED profile or tuck them behind an appliance or furniture. However, what if you mind the dotted effect but don't want to go the LED profile route? If that's the case, use this LED strip!
It's constructed with advanced Chip-on-Board technology, ensuring no single LED chips will be visible. Instead, you have a seamless and consistent luminance distributed evenly throughout the length of the strip light! This LED tape also has CRI >90, enabling it to deliver colours more vibrantly. It's ideal for window displays, catching the attention of passersby and directing them to limited-edition or best-selling products!
RGB + CCT Colour Changing
One outstanding feature of this LED strip light is its RGB colour-changing. This means you can choose from various colours of the rainbow, providing more diversity in your lighting design! It’s also dimmable, so you can tailor-fit the shades to get the one that fits your vision.
If you think that's it, wait, there’s more! Aside from the entire colour wheel and its different shades, this LED strip light will also give you access to the colour temperature spectrum. Therefore, other than red, blue, yellow, or green, you can also get cool white, natural white and warm white light! With this strip light, you can have the best of both worlds!
IP67 Rated - Ideal for Indoor or Outdoor Applications
Because this LED strip light has an IP67 rating, you can safely use it for indoor and outdoor applications. So, if you’re looking for a lighting solution that you can use in your bathroom, living room, garage, patio, or shed, this LED strip light is it! It will not malfunction or short-circuit if jets and splashes of water reach it.
Outdoor areas are left in the dark after the sun sets. But don’t you find it a waste that you cannot hang out in your backyard at night, especially when you have excellent weather? That will not be a problem anymore if you have these super bright strips that can produce 320 lumens per metre with a wide 180-degree beam angle!
24v DC - Needs an LED Driver
This LED tape light is 24v DC, so you’ll need an LED driver to make it run. Is there a specific driver that you have to use? Is it okay to use the one that you have in your storage?
A bit of maths is involved in finding the right LED driver for your strip light. You need to add the total wattage of the length you’re connecting (in this case, it’s 18w per metre), then find the closest available LED driver. Remember, always round up and not down because if the maximum load of the driver is less than the total wattage of the strip light you’re using, both the driver and the strips may get damaged.
5 Year Warranty
We offer a 5-year warranty with this LED strip light so that you can enjoy a brilliant and fun home for a long time without any worries. Shopping online has advantages and disadvantages. Yes, it’s convenient because you don’t have to leave your house and walk around the store to get the things you need. However, there’s no guarantee that the product you’ll receive will look like the pictures you saw or arrive in perfect condition.
With this extended warranty period, we hope that our confidence in this product will be reflected, providing you with more assurance and motivating you to buy. If you have any questions about this LED tape light, please don’t hesitate to call or email us!
Ideal to Use with our LED Profiles and Controllers
We highly encourage you to use this LED strip light with our Black Aluminium Surface Mounted Profile or Trimless Plaster In Aluminium Profile. An LED profile serves as a heatsink, so your strip lights will not overheat. Because of this, you’re assured that your lights can live through their lengthy lifespan. Aside from that, it makes the whole installation look more neat and refined!
Furthermore, this LED tape light is perfect with several of our LED controllers, giving you more options for light management. You can use a traditional but stylish wall controller, a convenient CCT + RGB remote control, or an innovative smart home controller that allows you to connect the strips to smart speakers like Alexa or Google Home!
| Remote Controller Required | Yes |
|---|---|
| Average Life (Hours) | 30,000 |
| LED Strip Type | RGB |
| IP Rating | IP67 |
| Choose LED Colour | RGB+CCT |
| Beam Angle | 180° |
| Lumens | 320 |
| Dimmable | Dimmable |
| Input Voltage | 24v DC |
| Power | 18w |
| Cable Length | 1000mm |
| Warranty | 5 Years |
| Width | 14mm |
For delivery or returns information, please refer to the page below.