Digital Pixel LED Strip Receiver Module
Key Features:
- Extra receiver to use with our controller set for pixel LED strip. (If you need both a receiver and a remote control, please see this product https://www.simplelighting.co.uk/digital-led-remote-control-receiver-kit/)
- Require a LED Driver to operate (5v to 24v DC)
- A new receiver module is required for every 8m of our pixel LED strip.
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Buy this additional receiver module when you either need to run more the 8m of pixel led strip lighting or you want to setup an additional zone (area) which is to be controller seperately.
If you also require a remote control, please view and buy this product https://www.simplelighting.co.uk/digital-led-remote-control-receiver-kit/
Core Functions:
- 5v to 24v DC - LED Driver required, although please note that if you are using our pixel led strip, you need to buy a 12v DC LED driver
- Max 10 amp only
- Suitable for most common strip types like WS2811, WS2812 and many more (If unsure, please ask before you buy).
- Suitable for 300 ICs maximum
Max Output Current | 10a |
---|---|
Length | 89mm |
Depth | 23.5mm |
Width | 48mm |
IP Rating | IP20 |
Input Voltage | DC 5-24v |
Warranty | 2 Years |
For delivery or returns information, please refer to the page below.