Dimmable 50W LED Driver, 12v or 24v DC
- Constant Voltage, 50w LED Driver
- Leading Edge and Trailing Edge Dimmable
- High efficiency up to 85%
- Protections: Short Circuit/ Overloading/ Over Current
- Cooling by free air convection
- Lightweight plastic case
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
50w 12v/24v DC Dimmable LED Driver
If you are planning to decorate your home with some stunning LED lights, you need to make sure that you have the devices that you need to make them work. Not all LED lights can be wired directly to the mains because most of them have a low voltage. Aside from that, dimmable low voltage LEDs need to have a specific device so you can smoothly utilise their dimming property. The solution for this is this dimmable LED driver!
This LED driver has a maximum capacity of 50w and is available in 12v DC or 24v DC. In addition, you can pair this LED driver with leading-edge or trailing-edge dimmers!
Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit)
This LED driver is mains wirable, which means you can connect it directly to your mains circuit. If you hardwire the driver to the mains circuit, you’ll be able to switch on/off your cabinet lights or strip lights using a regular wall light switch. However, there’s another option that you can do. You can add a plug at the end of the LED driver and plug it into the next available socket!
If you choose to hardwire the driver, you’ll need more technical skills and knowledge as it’s more complicated. Nonetheless, you’ll have a cleaner and more refined installation. On the other hand, if you add a plug, while it’s DIY-friendly, the plug and wire will be visible (unless you strategically hide them), and you’ll need a nearby empty socket.
Ideal for Low-Voltage LED Tapes & Under Cabinet Lights
You can pair this LED driver with our comprehensive collection of 12v or 24v DC LED under cabinet lights and LED strip lights. Just ensure that you have the correct LED driver for the fittings you'll run. If you're buying a 12v DC driver, look for a 12v DC cabinet light or strip light; if you're purchasing a 24v DC LED driver, get a 24v DC light fixture.
If you're not sure which LED driver to use with the LED fixtures you plan to buy, check our product description! You'll find the recommended number of lights for specific drivers in there. Please read through it before purchasing, so you won't be disappointed and won't waste your time, effort and money.
IP20 Rated - Indoor Applications Only
Since this is an IP20-rated LED driver, it’s only safe to install inside your home. You must keep it away from areas where liquids are often present because it does not have adequate protection to block them. Nevertheless, you don’t have anything to worry about, as there are still many rooms where you can use this LED driver!
You can connect it with the LED strip lights in your bedroom, living room, dining room, storage room, or hallway, or you can use this driver with the under cabinet lights in your kitchen or home office! You can also look online for inspiration and ideas or draw out your creativity. When you do, you’ll see more ways to use this LED driver than you can imagine!
Low Minimum Load! Only 20%
This LED driver has a minimum load of only 20% (10w), while its maximum capacity is 50w of power. Please do not overload this driver if you want to make sure that your lights will function flawlessly and live through their expected average lifespan. Always stay within the recommended minimum and maximum wattage!
Aside from that, this LED driver is equipped with several types of protection, including short circuit, overloading, and overcurrent. With this, you're assured that your LED driver and lighting fixtures won't suddenly break due to power surges, etc. Having safety precautions like these will not only protect your lights but also yourself, your family and your home!
3 Year Warranty
We offer a 3-year warranty with this LED driver, so you can use it with your lights to the fullest without any worries! Shopping online has its pros and cons. While getting everything you need without going out is convenient, you’ll have to wait until it gets delivered before you can examine the product’s quality. There’s no issue if you get what you expected, but what if you don’t? So, we hope this guarantee will reflect our confidence in this LED driver and encourage you to purchase it!
Feel free to email or call us if you have any issues or questions about this LED driver or any products on our website. Our team is always delighted to hear from you and prepared to assist you with your concerns!
| Quick Order Code | DRV-50W-D |
|---|---|
| Switch Type | Rocker Switch |
| Length | 175mm |
| Width | 58mm |
| Height | 22mm |
| IP Rating | IP20 |
| Dimmable | Dimmable |
| Input Voltage | 180-240v |
| Power | 50w |
| Warranty | 3 Years |
For delivery or returns information, please refer to the page below.