Natural White LED Tape 120 LEDs Per Metre - 4000K

LED lighting fixtures can convert the majority of the energy they consume into light with very minimal going to waste. Because of this, they can deliver outstanding illumination even with minimal energy consumption! Powered by the same technology, this LED strip light only needs 10w of power to produce 1293 lumens maximum brightness with a wide 120-degree beam angle!

To top it all off, this LED strip light has an extended average lifespan of 50,000 hours which is ten times longer than an incandescent bulb! So, if you want to enjoy excellent light quality without making your electricity bill skyrocket, swap your old lighting fixtures with this LED strip light!

When you purchase this LED strip light, you can avail yourself of our free bespoke cutting service! With this, you can specify the length you require, and you don’t have to buy more than you need. Just note that this LED strip is cuttable in increments of 25mm, so when you place your order, round off to the nearest 25mm.

Aside from cutting to the length you prefer, we will also solder a 2-metre cable at each end of the strip, so when it arrives to you, it’s ready to install. No more measuring, cutting and soldering! If you need more assistance with this service or have any inquiries regarding this strip light, don’t hesitate to call us at 0333 443 2465!

There are many ways to control this LED strip light, so you can customise it to suit your lifestyle! Also, it’s dimmable if you pair it with smart speakers like Alexa or Google Home, a mains wall dimmer, or remote control. You just need to match the control option with the appropriate LED driver.

You must purchase a standard LED driver if you want to use our extensive range of remote controls and wall plate controllers. Alternatively, you will need a dimmable LED driver if you prefer to utilise a LED-compatible traditional wall dimmer. Nonetheless, even if you don’t want to dim your strip lights, you will still require a standard LED driver to make it work.

This is a 12v DC LED strip light; therefore, it requires an LED driver to work. Unlike those mains-powered lighting fixtures, you cannot directly wire this LED strip to the mains circuit because it will overload. Still, you can load multiple strip lights in one driver as long as it does not exceed its maximum capacity.

To know the LED driver you’ll use, multiply the total length of the strips you’ll use by the wattage per metre of the strip. So, if you’ll use 5 metres of strip light, multiply it by ten and round up to the nearest available LED driver! Remember, it's always better to get a driver with a higher capacity than your strip light rather than the opposite.

This LED strip light can produce a stunning natural white LED colour, 4000K. What does it look like, and how does it differ from other colour temperatures? If cool white light has a crisp bluish tone and warm white light has a yellowish shade that resembles an old incandescent bulb, natural white is clear without any hints of blue or yellow. It’s like a cloudless sunny day, and it’s perfect for task lighting!

Natural white light can boost an individual’s focus and a space’s functionality. Plus, it’s comfortable on the eyes, so you can use it for hours without experiencing eye strain. You use this colour temperature for workstations like kitchen countertops, study tables or desks.

Installing this LED strip light couldn’t be easier! All you have to do is peel the backing from the 3M adhesive, which you can see on the rear of the tape, and stick it to your preferred, dust-free surface. The adhesive is very sticky and adheres well to most surfaces, so you should aim to get it right on the first try!

This LED strip light is fairly thin (8mm thick), so it’s easy to position in inconspicuous areas where it won’t shine directly into your eyes, like in your bedroom cove ceiling, kitchen cabinets, or living room accent wall. 

If you’re not confident doing the installation alone, call for an electrician.