Recti Super Slim 5w LED Cabinet Light - Colour Switchable

Cool white, natural white or warm white light? If you want a perfect lighting design and get the best lighting experience, you’ll need to pay attention to the colour temperature of your fixtures. It’s the one that dictates the overall atmosphere of the space, so if you stumble upon the wrong one, you’ll be less likely to achieve the ambience you’re after.

This LED cabinet light is colour temperature adjustable, meaning you get cool white, natural white and warm white light in one fitting! You only need to locate the small toggle switch on the side and slide it to the left or right until you arrive at your desired LED colour.

Why do you think LED lighting is the go-to lighting solution for many residential, commercial and industrial establishments? The answer is simple: it’s unrivalled energy efficiency! LED fixtures can convert most of the electricity they consume into light with very minimal becoming waste (heat). As a result, although it runs at a relatively low wattage, it’s still super bright!

Integrated with that same technology, this LED cabinet light may look small, but you cannot dismiss the outstanding illumination it can display! While only consuming 5w of power, it can produce 400 lumens maximum brightness and a wide 120-degree beam angle. Plus, it has an extended average lifespan of 30,000 hours, which is ten times longer than a traditional lighting fixture!

What makes this LED cabinet light so captivating? Not only does it have a simple and stylish look that subtly elevates the appeal of your room, but it also has a slimline design that's only 4mm thick! Even though it is surface mounted, it will not create any obstruction or cause visual distraction in your aesthetic.

On top of that, it has an anodised aluminium finish that goes well with everything! These lights will blend perfectly into your design, whether you have a traditional layout or a modern setup. If you're planning to add them to your kitchen, most kitchen gadgets have a similar finish, so it's going to match!

As mentioned earlier, this LED cabinet light needs an LED driver to work. Why? Because it’s a 12v DC (low-voltage) fitting, meaning you cannot wire it directly to your mains circuit without an LED driver. There are many varieties of LED drivers that you can choose from, and that might confuse you with which one to get.

How will you know if you’re buying the correct one? To avoid connecting your precious lights to the wrong driver, here are our recommendations. For three lights, you can use a 15W LED driver. If you’re using four fittings, get a 20W LED driver. Make sure that you don’t go beyond the maximum capacity of the driver, or you may ruin your lights.

How do you want to control your lights? Would you prefer something simple or something more advanced? If you have this LED cabinet light, you have the liberty to choose from a variety of control options! The most straightforward is wiring the LED driver to the mains circuit to manage the cabinet lights using a light switch or adding a plug at the end of the LED driver and plugging your lights into an available socket.

If you opt for modern lighting management, use this cabinet light with our remote control/receiver set or pair it with smart home devices like Alexa or Google Home (need a smart home LED driver for smart controls). Just keep in mind that depending on the number of fixtures you’ll use, you’ll either have to buy a 15W smart LED driver or a 20W smart LED driver (check the driver recommendation above).

If you're worried about the wear and tear of this LED cabinet light, rest easy. It's made from aluminium, so it won't easily rust or fall apart after you accidentally touch it with damp or flour-covered hands! This LED cabinet light is a high-quality kitchen fitting, making it durable enough to survive the diversity of elements present in that part of your home. 

Aside from that, this LED cabinet light also comes with a trouble-free 3-year warranty and a built-in 2000mm cable. If the cable is not enough for your project, you can use it with our plug-and-play extension cable, which you can get in 2 metres or 5 metres.