1m Long - Surface Mounted Aluminium LED Profile, 15mm Deep

If you have invested time, money, and effort in installing your strip lights, naturally, you’d want it to last, right? Well, by nature, strip lights are ribbon-like circuit boards without any outer frame. If it’s within easy reach, people can poke them. Top it off with dust and dirt build-up, and your strip lights will be damaged! So, how can you prevent this from happening? By using LED profiles!

When you enclose your strip lights in an LED profile like this surface-mounted profile, it gains an extra protective layer that fends off external elements. With this, your strip lights can live up to their expected average lifespan and potentially even longer! 

Searching for an LED profile that can accommodate an extensive range of LED tape? Put your quest to an end because this is the one! You can pair it with different types of LED tape, as it’s spacious enough to fit whether the strips are waterproof or non-waterproof. Feel free to use it in your living room, bathroom (depending on the IP rating of the strip), dining room, home office, bedroom, garage, kitchen, storage room, and hallways!

If you are considering using this LED profile inside your bathroom, guarantee that the strip light is IP65 and up. The profile itself is non-waterproof. Although it has a certain level of protection against light moisture, it will not keep the water out. 

As stated earlier, this LED profile is non-waterproof - IP20 rated only. It means you can only use it for indoor applications, away from areas where water is constant. Nonetheless, since it fits whatever type of LED strip light, you can use this LED profile in wet zones if you couple it with an IP65-rated strip light. Since the profile cannot wholly block water (just light moisture), the strip lights themselves must have sufficient protection to fend it off. 

Aside from that, this LED profile comes with a sleek anodised aluminium finish, complementing various interior design schemes (traditional or modern), and a frosted diffuser, distributing illumination at a 120-degree beam angle. 

While knowing the installation instruction is critical, you should not put aside learning the dimensions of the lighting fixture and accessory that you will use. Regarding this LED profile, knowing its dimensions will allow you to accurately estimate the quantity you have to buy with very little excess. Not considering this information will make you end up buying more than you need. What if you have nowhere to store the unused LED profiles in your home? It will be another problem that you will have to address.

So, keep in mind that this LED profile is 15mm tall, 17.5mm wide, 1 metre long, and has an internal width of 12.2mm!

Installation is quick and easy with this LED profile! It comes with all the necessary brackets, end caps and screws, so all you have to do is prepare your tools and review the installation manual. Also, don’t forget to clean the surface where you will install the profile so everything is ready when it is time to affix it!

You can shorten or extend this LED profile depending on the requirements of your project. To reduce the size, trim it with a hacksaw or other cutting equipment. On the other hand, if you plan to extend it, butt together several of these LED profiles until you reach your desired length. 

Please be informed that this LED profile comes with an extended 5-year warranty!  Make sure that you review all your plans and scan through your requirements before placing an order to ensure that you don’t miss anything.

If you have any questions or issues about this LED profile or any of our products, feel free to drop us a call or send an email! Our team is always ready to assist you with all your inquiries and eager to help you find the best lighting solutions for your needs!