Wall Mounted Controller, For Dual White CCT LED Products, Mains Powered
Key Features:
- A 4 zone LED colour temperature adjustable controller, use with 12-24v DC LED striplights, tape.
- Mains wired controller - easy install into an existing backbox or new installation
- 60s feature - tap it and the lights will switch off within 60 seconds, allowing you to exit the room
- Required accessory: each zone of lighting requires a colour temperature controller module.Use the drop down on this page to buy the receiver only, without the remote control.
- Glass fronted design with a white finish
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
Our wall mounted colour temperature LED Controller is a mains wired unit and features four individual zones. This means that you can control the colour and the brightness of four areas of LED lighting seperately, as good example of this might be LED Strip lighting being used in the ceiling cove, under cabinet, over cabinet and plinth area.
This product is absolutely perfect for LED Strip Lighting & LED Tape. Being four zone, please bear in mind that every individual zone of light requires its own LED controller module. (Sold Seperately)
This LED controller comes with a tempered glass front for safety and also features a 60s delay switch. A pracitical example of this might be at night time, maybe you will switch the lights off and it would provide 60 seconds to leave the room, whilst the room is still illuminated.
Please do remember when ordering that this controller is for low voltage lighting only, such as LED strips, under cabinet lights etc. You cannot dim normal mains lighting products with this dimmer.
| Width | 86mm |
|---|---|
| Height | 86mm |
| IP Rating | IP20 |
| Dimmable | Dimmable |
| Input Voltage | 220-240v |
| Warranty | 2 Years |
For delivery or returns information, please refer to the page below.
