24v Slimline 30 Watt LED Driver
- 24v LED Driver with a maximum power of 30 watts
- Low Profile Design (Only 19mm high)
- Built-In PFC.
- Flicker-Free.
- Protections: Short Circuit, Overloading, Over-Current.
- 3-year warranty
- Dimensions: 123 x 44 x 19mm
When you bought an incandescent bulb you knew that a higher wattage meant a brighter light. However, wattage really measures power consumption, not brightness. Lumens measure brightness. You can use the chart below to match the wattage of an incandescent to its LED counterpart. LEDs use less power and save money.
Warm lighting is similar to conventional lighting and has a softer feel. This lighting is perfect for living rooms and bedrooms.
Daylight - The colour of the lighting is used to represent ‘daylight colour’ indoors. It has neither the softness of warm white or the starkness of cool white.
Cool white - Is a brighter whiter light and is more suited for the bathroom or kitchen.
30w 24v DC LED Driver
LED lighting is one of the most sought-after lighting solutions today. Compared to traditional fixtures, they are more energy-efficient, long-lasting, cost-effective, low-maintenance, and eco-friendly. Also, LED lighting is far superior in terms of durability, light quality, and versatility!
While many LED fittings are mains powered, meaning you can wire them directly to the mains circuit, there are those that you can’t. Some LED lights are low voltage, so they require an LED driver to make them work! This LED driver is 24v DC and can accommodate a maximum load of 30w. Ensure that you stay within the specified range to avoid overloading the LED driver and potentially ruining your lights.
Effortless to Install
Installing this LED driver is quick and easy! It’s mains wireable, which means you can connect it directly to the mains circuit. Also, it includes a 1-metre-long power cable for effortless wiring! Simply link your lights to the driver, and you are ready to go. This LED driver also features screw terminals, allowing for secure and reliable connections (if you prefer to use your own cables).
Because safety is essential, this LED driver is equipped with built-in overcurrent, overvoltage, and short-circuit protection. This ensures that your LED lights remain protected from power fluctuations, extending their lifespan and providing you with peace of mind. So, you enjoy your lights to the fullest because you have nothing to worry about!
IP20 Rated - For Indoor Use Only
This LED driver is IP20 rated, so you can only use it indoors. You must keep it far from places where liquids are frequent since it does not have adequate protection to keep them out. Nonetheless, you don’t need to be hesitant about buying this driver because there are still many areas where you can use it!
You can pair it with the under-cabinet lighting in your home office, living room shelves, or kitchen cupboards. Also, you can couple it with the LED strip lights in your dining room, living room, bedroom, storage room, or hallway. There are so many things that you can do with this LED driver. You only need to widen your imagination and unleash your creativity!
Suited for 24v DC LED Tapes & Under Cabinet Lights
Because this LED driver has a 24v DC input voltage, it's suitable with our broad selection of low-voltage 24v DC LED under cabinet lighting and LED tapes. To be sure of the compatibility, go through the technical specifications of the fixtures you plan to buy and check if it also has a 24v DC input voltage.
In addition, make sure to use the correct LED driver with the suggested number of lights so your fixtures will be able to live up to their expected average lifespan. Anyways, you'll find our recommended number of fittings for specific drivers in our product descriptions, so read them before buying to avoid any mix-ups. This will prevent you from being disappointed in purchasing the wrong driver or wasting your time, money, and effort.
Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit)
As mentioned before, this LED driver is mains wirable, so you can wire it to your mains circuit. When you hardwire this driver to the main power supply, you’ll be able to control your lights using a regular light switch on your wall. However, if you want a different approach, you can add a plug at the end of the driver and plug your lights into an empty socket to turn them on/off.
If you do the first option, you’ll achieve a cleaner and more refined setup. The only catch is it would require more technical skills and knowledge. On the other hand, if you do the second technique, the wire and plug may show (unless you strategically hide it), and you must have a nearby empty socket. Nonetheless, the second method is more DIY-friendly!
3 Year Warranty
We offer a 3-year warranty for this LED driver, so you can use it with your lights to your heart’s content for a long time without any worries. Shopping online has advantages and disadvantages. While it's convenient since you don’t have to leave your home, you're not entirely sure whether or not the product is the same as the posted photo on the website. So, with this guarantee, we hope that it will reflect our confidence in this product and encourage you to buy it!
If you have any issues or questions about this LED driver or any of the lighting products on our website, you can call us or send an email. Our team is always ready to assist you with your concerns!
Quick Order Code | DRV-30W-24V |
---|---|
Switch Type | Rocker Switch |
Output Voltage | 24v DC |
Length | 123mm |
Width | 44.3mm |
Cable Length | 1000mm |
Height | 19mm |
IP Rating | IP20 |
Dimmable | Non-Dimmable |
Input Voltage | 220-240v |
Power | 30w |
Warranty | 3 Years |
For delivery or returns information, please refer to the page below.